Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK, Supervolt and other BMS via Bluetooth

Monitoring application for hybrid inverters using the Voltronic communication protocol & JK BMS via USB port.

A customizable Home Assistant card to emulate the JK BMS screen.

Arduino script to monitor and control a Jikong Battery Management System JK-BMS via BLE

Multiple JK-BMS by Modbus RS485

SEM32 (Solar Energy Manager 32) based on ESP32 for Soyosource Inverter, Huawei r4850g2 power supply and 48V battery

PCB and Case for the Arduino JK-BMS To Pylontech CAN converter

test console app for reading live data from jk bms via rs485 port.

Read Data from JK-BMS (PB1A16S10P) and many others newer JK-BMS over BLE

BMS JK Grafana dashboard

Adaption to use mqtt to control your Inverter via CAN

Tableau de bord énergie temps réel sur écran tactile 800×480 — ESP32-S3, solaire, batterie, routeur, Home Assistant

This is how JK-BMS UART can be read.

ESP32 touchscreen controller & dashboard for JK-BMS battery packs — live monitoring, settings & MOSFET control over RS485, 12-language UI, Home Assistant (MQTT), built-in web app + OTA, and a no-hardware Web Bluetooth dashboard.

Passive multi-pack JK BMS RS485 bridge for Home Assistant

Local-first off-grid solar / battery telemetry appliance (Renogy, Victron, JK-BMS)

One-shot JK-BMS BLE poller in Go — scans, connects, reads one JK02_32S cell-info frame, writes JSON, exits. For Pi/Linux + Home Assistant.

This ioBroker adapter integrates PACE BMS, JK BMS, and TDT BMS into ioBroker, allowing real-time monitoring of battery health, individual cell voltages, state of charge (SoC), and warning alarms.

Node-RED flow aggregating SmartShunts + JK-BMS into a Victron virtual battery (D-Bus)

JK-BMS 55AA passive listener for ioBroker — reads up to 4 parallel packs via RS485/Ethernet TCP directly into the JavaScript adapter, no MQTT required.