File_Server_Docker

File Server Docker for tcjj3/GK-2A_Hirez_Docker and tcjj3/Himawari-8_Docker.

Start:

1. Install docker-ce:

[tcjj3@debian]$ sudo apt install -y curl
[tcjj3@debian]$ curl -fsSL get.docker.com -o get-docker.sh
[tcjj3@debian]$ sudo sh get-docker.sh
[tcjj3@debian]$ sudo groupadd docker
[tcjj3@debian]$ sudo usermod -aG docker $USER
[tcjj3@debian]$ sudo systemctl enable docker && sudo systemctl start docker

2. Run File_Server_Docker:

[tcjj3@debian]$ sudo docker volume create xrit-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker run -d -i -t \
 --restart always \
 --name=File_Server \
 --net=host \
 -e FTP_PORT="21" \
 -e FTP_PASSIVE_PORTS="2500" \
 -v xrit-rx:/usr/local/bin/file_server/xrit-rx \
 -v himawari-rx:/usr/local/bin/file_server/himawari-rx \
 tcjj3/file_server_docker:latest

In this part, "21" is the FTP port, and "2500" is the FTP Passive port (If you want to bind any free port, just set it to 0). If you want to change these ports, just modify the numbers in "-e" arguments.

Like this (set the FTP Passive port to 0 for binding any free port):

[tcjj3@debian]$ sudo docker volume create xrit-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker run -d -i -t \
 --restart always \
 --name=File_Server \
 --net=host \
 -e FTP_PORT="21" \
 -e FTP_PASSIVE_PORTS="0" \
 -v xrit-rx:/usr/local/bin/file_server/xrit-rx \
 -v himawari-rx:/usr/local/bin/file_server/himawari-rx \
 tcjj3/file_server_docker:latest

If you want to use bridge network mode for this container, just remove the "--net=host" argument, then add "FTP_OVERRIDE_IP"(FTP Passive IP) environment variable and add port forward arguments using "-e" argument.
Like this (in this case, I had wrote some codes to get the host IP automatic for "FTP_OVERRIDE_IP"(FTP Passive IP), and please make sure "FTP_PASSIVE_PORTS" is not 0, because it's not convenient to forward all free ports which could be used in FTP Passive mode):

[tcjj3@debian]$ sudo docker volume create xrit-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker run -d -i -t \
 --restart always \
 --name=File_Server \
 -e FTP_OVERRIDE_IP="$(local_ip=$(ip route get 8.8.8.8 oif $(cat /proc/net/route | awk '{print $1}' | head -n 2 | tail -n 1) | head -n 1) && ([ -z "$(echo $local_ip | grep 'via')" ] && echo $(echo $local_ip | awk '{print $5}')) || echo $(echo $local_ip | awk '{print $7}'))" \
 -e FTP_PORT="21" \
 -e FTP_PASSIVE_PORTS="2500" \
 -p 21:21 \
 -p 2500:2500 \
 -p 137:137/udp \
 -p 138:138/udp \
 -p 139:139 \
 -p 445:445 \
 -v xrit-rx:/usr/local/bin/file_server/xrit-rx \
 -v himawari-rx:/usr/local/bin/file_server/himawari-rx \
 tcjj3/file_server_docker:latest

In this part, "21" is the FTP port, and "2500" is the FTP Passive port. If you want to change these ports, just modify the numbers both in "-e" and "-p" arguments.

Notice: The FTP Passive ports are recommended to be set in the range of 1025-65534, or it probably not working on some machines.

"137-138/udp" ports are for "nmbd", "139" and "445" ports are for "smbd", these ports would be used by default, so please make sure these ports on your host are not binded by other programs.

Notice: If your docker volume(s) are mount by vmhgfs-fuse, please using "-o subtype=vmhgfs-fuse,allow_other" argument like "vmhgfs-fuse .host:/ /mnt/hgfs -o subtype=vmhgfs-fuse,allow_other" to mount them to make smbd could access them.

Get Files

Local Disk

1. xrit-rx:

[tcjj3@debian]$ cd /var/lib/docker/volumes/xrit-rx/_data

2. himawari-rx:

[tcjj3@debian]$ cd /var/lib/docker/volumes/himawari-rx/_data

Via Remote Disk

1. Samba:

\\[Your IP]

2. FTP:

ftp://[Your IP]:21